Bambu Lab nametag

This tag perfectly fit over the “Bambu Lab” name on the printhead.

Customize the namtag with text:

You can write whatever you want over it in bambu studio with those steps:

1. Open STL file in bambu studio
2. Select the nametag object
3. Optional: changing the color to withe help when placing the text later on
4. Click on the Text shape tool
5. Options:
   • Font: Your liking
   • Size: 6 fits good on the name tag
   • Thickness: Does not matter
   • Text gap: Your liking
   • Angle: 0
   • Embeded depth: 1
   • Input text: Your liking
6. Place your text on the nametag shape
7. Optional: (make your nametag flat)
   1. Select the nametag object
   2. Click the cut tool
   3. Set “Height" parameter at 1
   4. Cut
   5. Delete the small text shape

Printing options

I personally used the “0.08mm Extra Fine @BBL X1C” preset provided by bambu lab. The result was ok.

Installation

In order to install the nametag on the printhed I've used double sided tape. It hold it in place for good.

Result