Very nice set of models - I've recolored shaman icon and it was printed very well. I've used 0.16mm layer to keep fine details, even though it required few extra swaps to keep things colored properly.
Thank you for you models!

jsfn91

0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill, 4 color

hvdzasaur

cover

2023-12-17_9yoz51wa8pap.jpg

2023-12-17_ocueimhg50qe.jpg

IMG_6452_68cb5a7a-bc0d-4f27-921f-ace7e1a42349.webp

IMG_6453_88d151da-d5ec-4ea2-a358-b264d12018d8.webp

IMG_6454_23fba109-addc-453d-9e0c-b5880c81d77b.webp

plate_1.png;filename*=utf-8''plate_1.webp

plate_1.png

ok2vvv

Since color printing always has the same amount of waste, it is necessary to fill the entire printing surface for maximum use of the filament. Printing on an A1 printer with AMS.&nbsp;ATTENTION NOZZLE 0.2mm! Quality not quantity.&nbsp;Attention, "ironing" is on, this means that the upper layers will be melted with a nozzle while gently adding filament. A cheap filament or a bad setting (this setting as it works and is tested with BambuLab filament + Creality filament) can clog the nozzle when ironing.&nbsp;Ready for 4 colors. Printing more than 24 hours long (with full A1 pad). Temperature recommended for PLA printing 230 degrees Celsius. Pad 70 degrees.&nbsp;All objects are extremely simplified because the original has extremely many triangles. Still, quality should be maintained. Not tried with a 0.4 mm nozzle, it looks like there are too low details in the slicer.

World of Warcraft Class Icon key rings

Global

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models

WORLD OF WARCRAFT for the horde WATCHTOWER

Key Ring - Keychain

AirTag Key Ring

Chinese Gaming Token - Bridge/Street