This is a remix of a few different designs that I put together to give you a complete package.
The main item is a rugged box with inserts from PjotrStrog, you can find the original here
The Hot Iron Stand is from Termiman, you can find it here. This will need a single 608 bearing, this is an affiliate link to the ones I use on Amazon, but any 608 bearing should work. This is a 20-pack and was less than $9 when I bought them. https://amzn.to/41FukEs. It also has a spot for an M3 screw and nut, but mine works fine without it. If you want to put a screw in it, this is the M3 screw set I use https://amzn.to/3RLf6Js
To save screws on the case, and because it is just more fun I used a file from xander to print pins, making the case itself fully 3d printable.
I printed the entire setup in PETG on 2 plates. Separated by color to save on color changes. There is an optional 3rd plate with a gasket printed in TPU, I used Overture High-Speed
This also includes the solder spool (2 piece) but I am not super thrilled with it so I am going to look for or model an alternative.
The box and accessories was done on a textured plate, and the TPU gasket on the engineering plate