MechWarrior - HueForge
MechWarrior - HueForge
Print Profile(2)
Description
Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.
These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Nozzle: 0.4
Filaments Used:
PLA Sunlu Black Transmission Distance: 0.6
PLA Sunlu Grey Transmission Distance: 5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #27 (2.24mm) swap to Grey
At layer #30 (2.48mm) swap to Blue Gray
At layer #32 (2.64mm) swap to White for the rest
Comment & Rating (12)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
