Support for GoPro from 10 onwards (possible compatibility with older models to be checked). It is attached to the window ensuring a perfect and solid seal, allowing the GoPro to shoot outdoor videos in complete safety.
It has been tested several times on the motorway even at speeds above 140 km/h and has never shown any sign of failure.
Made to be printed vertically, I loaded 3 different profiles so as to adapt to the printing material:
- ABS version with 40% infill
- PETG version with 40% infill
- PLA version with 50% infill
High filling percentages to ensure maximum tightness and resistance. Beyond that, I haven't seen any improvement that justifies use.
If you like my templates and find them useful, follow me. Write to me if you want any changes or if you need a clarification / problem. It supports my work and my passion even with a simple like.
**** Italian VERSION ****
Supporto per GoPro dal 10 in poi (eventuale compatibilità con modelli più vecchi da verificare). È fissato al finestrino garantendo una tenuta perfetta e solida, consentendo alla GoPro di girare video all'aperto in tutta sicurezza.
È stato testato più volte in autostrada anche a velocità superiori ai 140 km/h e non ha mai mostrato alcun segno di cedimento.
Realizzato per essere stampato in verticale, ho caricato 3 diversi profili in modo da adattarsi al materiale di stampa:
- ABS con 40% infill
- PETG con 40% infill
- PLA con 50% infill
Alte percentuali di riempimento per garantire la massima tenuta e resistenza. Oltre a questi valori, non ho visto alcun miglioramento che ne giustifichi l'uso.
Se ti piacciono i miei modelli e li trovi utili, seguimi. Scrivimi se vuoi qualche modifica o se hai bisogno di un chiarimento/problema. Supporta il mio lavoro e la mia passione anche con un semplice like.