jewelry box by Markus710

Markus710

Fashion>Other Fashion Models

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

26.3 h

7 plates

4.9(35)

version for 6x2.7mm Magnets

20.9 h

6 plates

5.0(4)

Boost

275

477

537

976

Released

Description

Hello,

I made this jewelry box for my girlfriend. So she can store rings, Earrings and other stuff like necklace.

I made inputs for little magnets that the Drawers shut in a straight line. You need 16 of these.

I used this one, but you can use any other magnets that fit in the holes. Magnets
I made a version for 6x2mm Magnets.
I made a version for 6x2.7mm Magnets too.

If you need any other magnet size, pls comment it and i will make an update on the model if its possible.

It Should be possible to print every thing without support. I had no problems printing it without support on my bambu lab.

You need four drawers. Put them above each other and glue the axis and top in place.

If you want the drawer for Rings and earrings you need:

2x Every Earring holder
1x TPU Ring holder left
1x TPU Ring holder right
1x The Drawer for rings and earrings

I would print the Ringholders in TPU that the rings get no scratches and are easy to put in and remove.

Comment & Rating (68)

@magoaryel

Print Profile

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

Excellent!!! easy to print, I use TPU without supports and works perfectly

The designer has replied

@ArchiAle

Great result! Did you use the sparkle filament? Thank you for using my print profile :)

@Krookr

Print Profile

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

great print. I used the slightly modified version from printables and edited them into this profile. printed in bambu pla matte black and Overture HS TPU

The designer has replied

@ArchiAle

Great!! Thank you for your review! :)

@ValdiLab

Print Profile

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

Print was flawless, thank you so much! Good job!

The designer has replied

@ArchiAle

Great! Thank you for your review! :)

(Edited)

@Badakgil

Print Profile

version for 6x2.7mm Magnets

Good, The rotation axis has no freedom, I had to modify it. print it with a scale of 99% in XY

@njanjo993

Boosted

Print Profile

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

The designer has replied

@ArchiAle

nice print! Thanks for using my profile :)

(Edited)

@bypo

Print Profile

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

The designer has replied

@ArchiAle

Great print! Thanks for using my print profile! :)

@lieby

Print Profile

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

belle création de boîte à bijoux

The designer has replied

@ArchiAle

Thanks for using my print profile! :)

(Edited)

@dagmar.smith

Print Profile

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

Very nice design, easy to print, large pieces printed on my Ender 5S1, too big for my A1 mini, hehe.. Great job.

(Edited)

The designer has replied

@ArchiAle

Thanks for using my print profile! :)) I'm happy that you liked the result

@user_2554379991

Boosted

Print Profile

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

great

The designer has replied

@ArchiAle

Thanks for using my print profile! :)) I'm happy that you liked the result

@user_3950464150

Print Profile

Quality profile, accurate and tested - 0.16mm layer, 2 walls, 10% infill

love this jewelry box. If I printed it again I would sand the center post a little more. it fits now but I would like the drawers to swing a little easier.

The designer has replied

@ArchiAle

thank you for rating my print profile! :)