I designed this two color model for a badge cap for the Touring badge on my 22 Civic to get rid of the chrome emblem, but still be able to read the word touring unlike just spraying the emblem with plastidip. I sized it to fit the 2022+ Civic, but if you have a Honda Touring of any type, this should work by just scaling it up or down. I know the CR-V we have needed to be slightly scaled down to fit its badge, but some larger vehicles may need scaled up. Just play around until you are satisfied with the fit. Lastly, once its printed, just clean the emblem really well and stick it on with 3M tape. The badge may be slighty curved, and the model prints flat, but just applying pressure for a minute or two was enough for get it to stick to the shape of the curve and has stayed that way for months so far. Material should not be PLA, since that will tend to warp over time in the sun. I used PETG, but ASA or Nylon would be even better.