A1 Non-AMS PTFE Cord Clip
Copyright Claim
A1 Non-AMS PTFE Cord Clip
Boost
23
35
15
Print Profile(3)
3 clips - 1g, 5 minutes
Designer
10 min
1 plate
4 clips compatible with A1mini
10 min
1 plate
PLA 0.20mm
12 min
1 plate
Boost
23
35
15
0
125
79
Released
Description
This is a cord / PTFE tube clip for the Bambu Lab A1 printer I designed in Fusion 360 to stop the A1extruder cable from rubbing against the bed. This clip was designed for A1 printers that do not use the AMS lite to only clip the one cord and PTFE tube vs the one cord and 4 PTFE tubes for the A1 with AMS lite. The print profile uploaded has three clips and uses less than one gram of filament for all three clips combined.
Comment & Rating (15)
All
Print Profile
3 clips - 1g, 5 minutes
Perfecto para sujetar cable y PTFE cuando se imprime desde bobina externa. Rápido y recomendable.
0
Reply
Print Profile
3 clips - 1g, 5 minutes
Really quick and easy print. They clip onto the A1/A1 cable easily and hold in place well. Definitely keeps my cables organized and away from the bed.
0
Reply
Print Profile
0.25mm - Set of 4
Nice designs and easy printing. But unfortunately they don't stay in place. Can't be used.
0
Reply
Print Profile
3 clips - 1g, 5 minutes
they don't really hold on once the machine start moving.
0
Reply
Print Profile
3 clips - 1g, 5 minutes
Easy print, but sometimes slips off.
0
Reply
Print Profile
3 clips - 1g, 5 minutes
decent print but clips pop off top easily
0
Reply
Print Profile
3 clips - 1g, 5 minutes
perfect fit
0
Reply
Print Profile
3 clips - 1g, 5 minutes
Good
0
Reply
Print Profile
4 clips compatible with A1mini
0
Reply
Print Profile
3 clips - 1g, 5 minutes
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld