Mushroom Power Up - Super Mario Bros. by rico3Dmaker

rico3Dmaker

Toys & Games>Characters

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 3 walls, 5% infill

Designer

5.9 h

4 plates

4.9(23)

0.16mm layer, 3 walls, 5% infill

11.4 h

1 plate

5.0(1)

Boost

101

210

322

468

Released

Description

Mushroom Power Up Super Mario Bros.

With this STL, you can print the mushroom in any color you like.

For example: Red for super mushroom , green for 1-up, gold for coin mushroom and blue for mini mushroom.

All parts are to be printed separately in the correct corresponding colors to eliminate the need to paint.

Easy to assemble:
The mushroom and head arrows should be pointing towards each other. The same must be done for the eyes.

Glue the sparkles to the eyes and the eyes to the head piece (it is not necessary to glue the mushroom to the head)

Attention
The version of the head to serve as a container for objects is available in Rock, Proppeler and Spring versions. Check-out in my Cults Profile.

Scale
If you want to print the mini mushroom use the maximum **70% scale of the files.** - in this case, for the eye sparkles, use a scrap piece of white filament to press into the black eye pieces with as a small amount of glue. Trim the excess filament off with your cutters. (last image in gallery).

Infill
Head - 20%
Mushroom and eyes - 10%

Resolution: 0.16mm

Supports: Mushroom (optional - for best results)

Scale: 100% to 70% - (It is important to ensure the fit of all parts)

---

Don't forget to tag us in your posts as @rico3dmaker showing your best printing!

Comment & Rating (35)

@GodzillaDoodle

Print Profile

0.16mm layer, 3 walls, 5% infill

head does not fit flat against the mushroom. I’m trying to glue the top piece to the bottom piece and there is no contact. there are also only 4 white pieces but 5 spots on the head. that’s easily fixed by printing another one.

(Edited)

The designer has replied

@rico3Dmaker

Hello! all good? You fit the upside-down mushroom head. The arrows must be pointing towards each other. See my photos. ***I placed the head face down on the table to make printing easier, but the right way to fit it onto the mushroom is inverted. The photo I sent is of the hollow head, available on another model of mine, but the fit is the same. :) Thanks for letting me know about the white spots, I fixed the print file

(Edited)

@GodzillaDoodle

Replying to @rico3Dmaker :

Yeah, I lined up the arrows and they still don't fit flat. It's hard to tell from your photos, but I think the fit for your hollow head is different than the one uploaded here.

(Edited)

@rico3Dmaker

Replying to @GodzillaDoodle :

Just like in the photo, the head is inverted. the flat part goes inside the mushroom

@Maxxcreeper

Print Profile

0.16mm layer, 3 walls, 5% infill

great print !

The designer has replied

@rico3Dmaker

Wow! 🤟👏👏👏

@ArkyPT

Print Profile

0.16mm layer, 3 walls, 5% infill

just awsome!! thanks for sharing

The designer has replied

@rico3Dmaker

Amazing!!!

@sage117

Print Profile

0.16mm layer, 3 walls, 5% infill

Printed well and my sons loved them.

The designer has replied

@rico3Dmaker

Amazing!

@Fridolin83

Print Profile

0.16mm layer, 3 walls, 5% infill

awesome print my Kids Love it

(Edited)

The designer has replied

@rico3Dmaker

Amazing!

@siqual_lab

Print Profile

0.16mm layer, 3 walls, 5% infill

(Edited)

The designer has replied

@rico3Dmaker

Amazing!

@cyberjo50

Print Profile

0.16mm layer, 3 walls, 5% infill

Came out pretty good, I scaled down to 70% to fit all parts in my A1 Mini plate.

@samijel

Print Profile

0.16mm layer, 3 walls, 5% infill

Became very beautiful Thank you for your work

@ledvinaphotogra

Print Profile

0.16mm layer, 3 walls, 5% infill

Fun print to add to my growing Mario collection. Advise using extra top layers on the mushroom white dots otherwise you may see the infill. Otherwise great design and print!