This simple retro planter is the perfect size for medium to large succulents, cacti, or other houseplants. My aim with this design was to create a stylish planter that also balances print speed and strength. The models are designed with walls that are exactly 1.6mm thick so that each layer is completed with exactly four passes of a 0.4mm nozzle.

I have posted files for three sizes (5", 7", 9”). For reference, the largest size just barely fits on my Bambu Lab P1P.

Small: 5.5" height, 5" opening
Medium: 7.5" height, 7" opening
Large: 9.5" height, 9" opening

Print Settings I Used:

• Variable layer height
• 10% infill
• 0.4mm nozzle

This model is not for commercial use. If you are interested in selling your 3D prints of my models, please refer to my Patreon!

If you like this design, consider leaving a tip! I'm a university student that designs planters on the side, so anything helps! https://www.paypal.me/theprintedplanter