Hi, I have created a cable cover for the Xtouch additional display for the P1S printer. Just stick it on with double sided tape. It is my original model. It also has a pen holder.
Procedure:
Route the cable behind the display and into the hole on top of the printer. Then you pull the cable through the bottom to the integrated USB in the printer, which will power it. The display will start automatically when the printer starts.
The hole through which the cable will run.
Dimensions: 180x30x8
Supports: NO they are not needed but if you want you can.
Material: whatever material I used, PLA.
Filler: 15% gyroid
My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm.