Here are some Logo-Plates for the Hexawall from https://www.prusaprinters.org/de/social/25333-3dmonkeynl/about

If you want to get another brand or logo, feel free to contact me

orientation of the hex is variable, you can combine and connect in mutlipple ways

• Chaosdrucker (big and small version)
• Mainsail
• Nobufil
• Open Source Hardware
• Prusa Research
• Raspberry Pi
• RatRig
• Redline Filament
• Voron
• CR3D
• Phaetus
• WLED
• Lecktor
• 3D Druckerplausch
• caribou
• Das Filament
• E3D
• noctua
• CNC Kitchen
• Flexi Rexi

i also added the original Parts that you need to build the hex

Update:
i added some modified small parts

1 has a hole on the outside, you can use that to install a plug for powering this

the second has a hidden spot for a hook or a screw to mount that thing

the third is a part to glue that to a wall or something else, its like the hook part but closed

If you need other Pictures, please feel free to contact me or you can do them on your own:
hex plate with 96mm, 1.2mm height, plus your graphic (i usually make that 1mm high)

To illuminate I used 14 ws2812b LEDs (18 should fit as well, depends on the led/meter of your stripes), a wemos D1 mini and the great WLED app https://kno.wled.ge/

On the WLED page are very good explanations on how to install and configure that

Otherwise you can use just normal led stripes with a switch for example

actually there are more logos on the way, ill update them as soon as the owners of that logos/brands allow that