AMS Adapter ring Inland and Overture Cardboard Spools for Bambu Labs 199-200mm range
Copyright Claim
AMS Adapter ring Inland and Overture Cardboard Spools for Bambu Labs 199-200mm range
Boost
21
37
34
Print Profile(1)
0.2mm layer, 4 walls, 15% infill
Designer
36 min
1 plate
Boost
21
37
34
1
121
291
Released
Description
My take on the adapter rings for Inland and Overture cardboard spools. (May fit others that measure in the 199-200mm range.)
My print profile I enabled the fuzzy skin setting to add just a little extra grip to help them not slip on the AMS rollers.
Comment & Rating (34)
All
Print Profile
0.2mm layer, 4 walls, 15% infill
it printed out fine but it didn’t work in my AMS and wouldn’t roll correctly.
The designer has replied
1
Reply
Sorry about this but I appreciate the feedback.
0
Reply
Replying to @t147caddy
Not a problem. I am just trying to help the community out with the cardboard spools.
(Edited)1
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Well designed, perfect fit.
(Edited)The designer has replied
1
Reply
thanks 👍
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
works good for keeping the cardboard dust from accumulating by preventing the cardboard from contacting the rollers keeping it from breaking down. great fit on the inland spools
The designer has replied
1
Reply
glad to help 😊
0
Reply
Printed with the provided settings. Fits and works perfectly with Inland spools in my AMS.
The designer has replied
1
Reply
thanks 😊
0
Reply
Worked great, Thanks!
The designer has replied
1
Reply
thank you 😊
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Fits perfectly!
The designer has replied
1
Reply
Glad to hear, Thanks!
(Edited)2
Reply
works great on inland pla but i cant get it to fit the pla+ any suggestions?
1
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
P1S as-is and it printed perfectly.
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Works great. Keeps the cardboard in place. This was my 3rd print getting my X1C. Appreciate got design and time.
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
It's simple but effective and fits well. Ran it just in some pla I had loaded hit print with my normal presets and it came out great. Fit the cardboard spool firm but not hard to get on or off. Not sure what all brands it fit but the advertised inland was dead on
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld