If the poop emoji was going to celebrate Christmas, this is how it would do it. Make your Christmas totally excrement with this festive Christmas poo! There are separate solid, hollow and magnetic versions supporting either 5x2mm or 6x2mm disc magnets.

Printing

The solid and hollow versions are scaled down to 25% in the profiles provided here, hence if you want a really large one you can upscale it without losing quality.

The magnetic version is already scaled down and not re-sizable without losing support for the magnets. They are made to be printed directly on the print bed in normal orientation with no support. I used a 0.4 nozzle with a 0.2mm layer height for everything.

The colours I have used in my print above are all Extrudr NX-2 matte colours - brown, grey, black and red.

Magnets

If you have chosen a magnetic version for safety purposes put a small amount of glue on the magnets before insertion.

The gap may or may not be tight depending on tolerances on the magnet/hole so the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.

Versions

2023.11.14: Initial version.

Support

If you like our poop please consider joining our club on Printables!