This is a chamber temperature and humidity sensor for P1/S. It utilizes the common temperature and humidity sensor (with wire).

To make it cleaner, i have printed the xTouch spacer for P1P and P1S to route the sensor cable behind the P1 screen.

Step:

1. Cut the the circular mount to remove it from the sensor cable. This is required so the sensor cable can go through behind the screen mount.
2. Once removed, unmount the p1 screen then route the cable inside.
3. Inser the sensor cover then fix the cable like this.
4. Stick a double sided tape under the mount. Recommended the foam type tape.
5. Mount the temperature sensor screen.
6.