Cleveland Browns Brownie the Elf
Copyright Claim
Cleveland Browns Brownie the Elf
Boost
14
17
12
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
8.9 h
2 plates
Boost
14
17
12
0
54
87
Released
Description
I designed this Brownie the elf light box for my father-in-law since he is a diehard fan! this was one of the first designs I made.
LED Strip Affiliate Link >> https://amzn.to/45WmO8R
Or any other light strip should work!
Please do not sell my designs without my express permission.
This is a multiple part print. The "COLOR" files you will need to import together as one part. The Back Plate and Stand print separate but fit on the same plate and should be put on after LED installation.
Print the parts part face down
Comment & Rating (12)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
Go BROWNS
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Printed a TON of these for Christmas presents. They always printed perfectly.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
(Edited)
The designer has replied
0
Reply
you have to slightly squeeze the back and press the point by the arm
(Edited)1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld