Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
5.6 h
2 plates
Boost
17
27
7
0
38
40
Released
Description
Here is a lighbox design I worked on for my oldest daughter. It pretty simple setup. I did break the colors down to 4 to be able to print with just one AMS.
Also included in the wall hanger backplate as well as the complet flush. Lightbox can stand on its own.
Comment & Rating (7)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
printed very good, be aware of the size of the cable entre.
(Edited)
The designer has replied
0
Reply
sorry about the small tolerance on the cable entry. I made it for a barrel connection I was using. I will fix and upload an update this weekend. happy you enjoyed the print!
(Edited)1
Reply
thank you! the model is great. Some space is needed to get the controller inside. If the entry is 15-18 mm that should work.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
came out good.
The designer has replied
0
Reply
Thanks for the rating and download of the design. Looks good!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
0
Reply
do you mind sharing what issue you had with the print?
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld