***QUICK Temp Tower***

Download the 3mf and open in Bambu Studio. Beware of Print profiles as it might not transfer code correctly!!!

I had trouble with a few of the temp towers I was using not having the proper code to change the temperatures or utilizing a textured plate instead of a cool plate. They will not let you edit the code and wipe the plate clean if you try to change anything.

The ones with proper codes tend to be large. Taking about 2 hr prints, using 30g of filament. I wanted something smaller and quicker.

This one comes in at about half the time and filament. Just under 1 hr print and 17g of filament.

*** MAKE SURE TO CHECK THAT THE TEMPURATURE PROFILE CHANGES***

On the Preview page, the drop down typically defaults to line type. Click the drop down and go to temperature. You should see different colors in the tower representing the different print temperatures like the cover photo.

I've printed two or three other peoples only to find out they didn't have it coded correctly, wasting my time and filament!

Found this one on Printables - 417363