No Print Profile yet. Add one to earn points.
ModulIX-O is a tiny but solid and complete screw less Drill-press.
I was looking for a smart solution to make precise holes in small parts. So I decided to do this one. I wanted a solution that don't need to use screws or any other shopping parts.
I use an IXO and a Dremel, so one of my goals was that it should fit both ^^
It is completely modular, to be flexible for new devices too. A vice will be added soon.
See it in Action here: http://www2.pic-upload.de/img/29391162/output_oOBSxI.gif
It works, but iam still working on it. If you have issues, feel free to message me, i will try to fix it.
All you need is a good calibrated Printer and maybe 3 compression springs.
Features:
greetz
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1 - 0.3 mm
Infill:
min. 50% +
Notes:
The "Y Carrier" is tricky to print, it's the most important part. Be sure that it gets printed clean and accurate! Maybe it needs a little to be filed inside.
The Base parts should be glued together for better stability.
I recommend to print all parts with a really high infill level.
Auto Lift-Up & Auto on:
Depending on your spring length, you should cut the Tubes to fit your springs,