Martinsville Track Map Wall Art (With Nameplate)

Copyright Claim

Martinsville Track Map Wall Art (With Nameplate)

Boost
6
9
6

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
Designer
1.5 h
1 plate
5.0(5)

Boost
6
9
6
1
20
20
Released

Description

Model

3D MODEL DESCRIPTION

Track map wall art for racing enthusiasts! Models range from 180 -250mm wide but can be scaled or broken up for your needs. Use wall-safe double-sided tape for wall adhesion with mess/damage-free removal.

3D PRINTING SETTINGS

.20 layer height
15-20% infill
2-3 walls
Pause for filament change at nameplate start
Iron top layer only for a clean smooth finish (pause already built into profile just slice and print)

Comment & Rating (6)

Please fill in your opinion
(0/5000)

Nice track and it prints well. The back stretch does not have a pit lane, so the inside lane on the top of the model should be removed. Martinsville has a pit lane that starts on turn 3, wraps around inside turn 4 and down the front stretch. The pit lane continues around turns 1 and exits at turn 2.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
excellent
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Perfect
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
No more