My youngest is a fan of Pokémon so I thought I would make her something she can hang on her wall. It is based off my favorite Pokémon Game and my favorite Pokémon Squirtle who has evolved into Blastoise.

I only have one AMS at the moment, so I had to separate the canons on their own plate since I am using 5 colors. If you have multiple AMS, then you can print the canons and Blastoise bust on a single plate. The cartridge of course will need to be printed on its own plate unless you resize the file and items. I've included two different Blastoise busts for you to print. One he is looking straight forward, and the other has him at an angle looking down. I didn't attach the cannons at the moment as I am using it for other decorations. Once done I will attach them.

Once you have all the files printed, you would need to attach the bust and cannons however you want to on the cartridge. I would recommend trying a few placements first before finalizing the bust and cannons. I know the print says over 43 hours, but that is due to both busts being on the file and the cartridge. If you remove one of the busts, it will reduce the time. The cartridge takes about 16 hours as well as each bust.

I used stock settings on my P1S, used 15% infill, and gyroid for the infill type. I did use adaptive layers on the top layers/mouth to slow it down to smooth out the face.

If you have any questions or comments, feel free to leave them down below and I will be happy to help anyway I can.