Makita DUB185Z DUB186Z adapter nozzle air mattress
Copyright Claim
Makita DUB185Z DUB186Z adapter nozzle air mattress
Boost
27
51
13
Print Profile(1)
PLA, 0.2mm layer, 2 walls, 15% infill, support on
Designer
5.8 h
6 plates
Boost
27
51
13
0
82
66
Released
Description
Makita DUB185Z DUB186Z (Affiliate link) Adapters for inflatable things with different nozzle widths.
Pay attention to the picture and check your blower, there seems to be a similar blower from Makita with a different fitting.
The adapter overall is 80mm long, the upper cone part is 20mm long.
I recommend to print it with TPU, but PLA and so on will also work.
Print Profil Build Plate selection:
- makita-16mm-nozzle
- makita-18mm-nozzle
- makita-20mm-nozzle
- makita-22mm-nozzle
- makita-12mm-long-nozzle
- makita-18mm-long-nozzle
Comment & Rating (13)
All
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill, support on
Nice idea and should help with some water clearing on the motorbike! went with a stumpy and a long one
1
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill, support on
thx, very nice
0
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill, support on
1
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill, support on
(Edited)
0
Reply
Printed great, afterwards I realized I had a different model of blower and the fitting is smaller. Not uploaders fault.
The designer has replied
1
Reply
Too bad, yeah I think there is an older model with the same name, but different fitting. I will add this to the description.
0
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill, support on
PERFECT
0
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill, support on
0
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill, support on
0
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill, support on
0
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill, support on
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld