Bambu Lab second light
Bambu Lab second light
Print Profile(1)
![OFFICIAL - [PLA] - 0.2mm layer](https://makerworld.bblmw.com/makerworld/model/USf2ad229d0fadbf/42503311/instance/2024-01-17_c885d5e1cf632.jpg?image_process=resize,w_100/format,webp)
Description
This is finally the second light for your Bambu lab!
no more ugly risers!
 |  |
Easy to print, easy to install
As a light source, you can use a 20 cm 5V LED strip 8mm high.
The one in the picture is a 480 led/m strip.
I have used this
You can simply fix it with 3 neodimium magnets 10x3mm (even without glue)
Or with three M3 screws by taking advantage of the holes already on the printer frame even without using inserts since the holes are already threaded.
With guides present on the light you will not struggle to put it in the correct position.
You can use an old usb cable to power it by taking advantage of the port already on the Bambu
If you want to control it from the menu so that it turns on and off together with the original light, you can connect it in parallel with this one.
If you use Xtouch screen (GitHub - xperiments-in/xtouch), there is also a slot for the DS18B20 temperature sensor. This allows you to keep an eye on the printer's internal temperature.
If you want you can remove the original light and use two of these for even more illumination.
Ideal for P1P and P1S models. Don't know if it also fits on X1 and X1c. let me know. Thanks
Plese, consider my other models:
iLab 3D | Published - MakerWorld
Comment & Rating (3)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
