Wall Mounted Spice Rack (short back)
Remixed by
Boost
24
37
11
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
4.1 h
1 plate
Boost
24
37
11
1
64
64
Released
Description
This is a remix of an original model by koeut1 on thingiverse. I wanted to make one whose back was shorter to reduce print time and put more than 1 on the wall. If you just scale it the front becomes shorter as well. I also wanted it longer so I made one that is 11 inches which fit my needs and is the largest I could print on my P1P.
Theirs a version with screw holes and one without. You can just attach to the wall using 3M mounts. I found 15% infill is more than enough to make it feel strong
Comment & Rating (11)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Great spice shelf. Fit exactly my needs. I had some wrapping issue that I am aware of but the shelf itself works great.
Thanks for sharing
The designer has replied
1
Reply
thank you for the pictures, it looks awesome in red.
(Edited)1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good design. Could use some optimization to use less material, potentially add pattern cutouts to rear wall. But overall solid design.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I missed a spot with glue. So one corner lifted a little.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
works great, easy print. thank you
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Related Models
© 2024 MakerWorld