When the film spreads through the webs, it shows that a plastic straw pulled out from the poor turtle's nostrils, which used its misfortune to slightly change the world.

Many people have begun to take the initiative about stop using the plastic straws, and some chain restaurants have no longer offer the plastic straws to their customers. As the matter of fact, it is not just straws that would harm the turtles in the ocean! Marine debris, plastic bags, fishing hooks, abandoned fishing nets, etc. also lead turtles to death. The rapid development of science and technology have created many substances that should not exist in our nature; Unfortunately, most species are not evolving fast enough to catch up with us. These sea turtles are typical examples. They don’t have enough ability to distinguish the jellyfish they love from those plastic bags that might kill them, therefore, It’s much more important that we should think about our nature when we’re trying to get anything further progressed.

I’ve seen turtles swimming below me when snorkeling.
The slow waving movement of their forelimbs looked like that they were flying under the sea, which provided the inspiration [flying sea turtle]. I took my previous origami turtle creation as a prototype, by adding more details, and used the movable mechanism to imitate the body undulating, even the relative movement of the neck and body of the sea turtle under reaction force. It is my goal to reproduce the turtle swimming gracefully under the sea! After a few weeks of hard work, I completed [flying sea turtle] automata! And I love it a lot! The design process and the final completed work bring me a lot of fun and achievements. Sincerely, I hope everyone can be delighted during the assembling.

Thanks to SpiderMaker for sponsoring the creation of this work.
Material used SpiderMaker PLA
Matte Iron blue/Matte Clay/Matte Orchid Purple/Matte Brick Red/Matte Kraft Brown

https://www.amazon.com/SPIDER-MAKER-Matte-Printer-Filament/dp/B07HX9DY9F

https://amaochan.work/
https://www.facebook.com/paperworkers/

https://youtu.be/Y04A6KfLbRo
https://youtu.be/mZWQ2mEQNc4

Print suggestions
1.Layer height 0.2mm
2.Low down the flow to 90%or 95%.
3.Add raft.
4.Add oil on moveable parts.
5.Replace old parts with new parts which is added "-NEW" after the original part name.
6.Part "FT-GEAR02" is advised to print in layer height 0.1mm or 0.15mm,and it needs support.

海中飛翔的海龜

當塑膠吸管從可憐的海龜鼻孔中拔出的影片在網路中流傳，這海龜用牠的不幸，稍微的改變了這世界。許多人開始主動不使用塑膠吸管，連鎖餐廳也不再提供塑膠吸管；但是能在海洋中傷害海龜的不只是吸管！塑膠袋、魚鉤、廢棄魚網……等等，這些海洋垃圾也是能讓海龜溺死在海底的。人類的科技快速進展，創造了許多在自然中本來並不存在的物質；大部分的動物是無法適應人類的進步，海龜就是個例子，牠們還沒進化到能夠辨別，牠愛吃的水母和會害死牠的塑膠袋的差異！也許我們的進步應該更相容於自然環境，才是對的方向！

我曾經在海上浮潛時，親眼見到海龜從我的下方游過，牠前肢緩慢的揮動，就像是在海底飛行一般，這經歴啟發了［海中飛翔的海龜］作品的創作方向。我採用多年前的創作--摺紙海龜，當成原型，並在摺紙的基礎上，增加了更多的細節；再用可動的機構，模擬海龜揮動前肢游泳、牠身體微妙起伏，及在反作用力下海龜頸部與身體的相對運動。重現海龜在海中優雅游泳，是我的目標！在幾星期的努力下，我完成了［海中飛翔的海龜］automata！我很喜歡這個作品！在設計這作品的過程與完成結果為我帶來許多的樂趣，也希望大家能在列印組合的過程中得到快樂！

感謝 SpiderMaker 織造者 贊助本作品之創作
使用材料 SpiderMaker PLA
消光鐵灰藍色、消光陶土色、消光瓦紅色、消光蘭紫色、消光原皮色

列印建議
1.層高0.2mm
2.流量降到90-95
3.海龜本身加基筏列印，不要支撐。
4.組裝完成後在會移動零件加些潤滑油。
5.請選用檔名有(new)的物件取代原來物件。
6.FT-GEAR02的建議層高為0.15mm或0.1mm，需要支撐。