Trophy - You're the bomb:
- Simple to print model
- No AMS needed
- Simple to assemble
- Customizable name plate: ‘You’re the bomb'
- No support needed
Dimensions:
- Total height : 120mm
- Total lenght: 120mm
- Total width: 100mm
Print guide:
- Load the Bambu file on you computer and select the first buildplate
- The first buildplate contains the bomb and I printed this in black PLA
- The second buildplate is for the base, the connector and 1 part of the spark, I printed this in gold PLA
- The third plate is for the second part of the spark, I printed this in red PLA
Print guide for name plate:
The name plate is in a different Print profile (3mf file) which you have to load separately. This file hold the ‘You’re the BOMB' text as well as an empty plate for you to customize.
- Start printing the name plate with your color of choice
- There is a pause on layer 11, change the color and load the second color
- Hit resume print and let the plate finish
Create your own name plate:
There is an empty name plate where you can add your own text in Bambu studio.
This is how to do it:
- Select the blank name plate on the buildplate
- Select the text button on the top in the prepare window
- Write your own text in the input field
- Set thickness to 1mm
- Place your text on the empty name plate
- Slice the name plate and scroll down with the green layer height bar to layer 11, right click and 'add pause'
Assembly guide:
- Print all the parts: Base, bomb, connector, 2 sparks and name plate
- Press fit the name plate in the base
- Insert the connector in the base and place the bomb on top (Normally the fit perfectly together, but you could add some glue)
- Slide the two parts of the fire sparks together and fit in the round hole in the bomb
Print time and used material
- Print time of all plates: 5 hours
- PLA Gold filament, approximately 74gr
- PLA Black filament, approximately 63gr
- PLA Red filament, approximately 0,70gr
If you find my model useful, please like :-)
Happy printing!