ETP-Bot V2 - Action Figure - Easy to Print with PLA by Make-A-Print246

Make-A-Print246

Toys & Games>Other Toys & Games

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 3 walls, 30% infill

Designer

3.8 h

4 plates

4.9(60)

A1mini, 0.16mm layer, 3 walls, 30% infill

3.9 h

4 plates

5.0(22)

1 Plate All Parts 3 colors just over 3 hours - 0.16mm layer, 3 walls, 30% infill

3.3 h

1 plate

4.8(37)

0.12mm layer, 3 walls, 30% infill

3.8 h

4 plates

5.0(2)

Boost

312

523

160

1.2 k

2.2 k

Released

Description

Update 15.12.2023:

I've added a few new head variants (Smile Eyes, X-X Eyes, Heart Eyes) and a new hand variant (middle finger) has been added to the STL data.
Have fun :)

**********

Here you can find the new version of the (Easy-to-Print) ETP-Bot.
The action figure can be printed entirely from PLA, and the parts are very stable even when made from PLA material thanks to the alignment of the print lines.
The individual parts are assembled by hand - see the PDF drawing and parts list.

The figure is fully movable and can be extended as needed.

Please leave your feedback. I would be happy to make further improvements to the ETP bot.

Have fun printing.

best regards
Alexander
Make-A-Print

Documentation (1)

Assembly Guide (1)

ETP-Bot_V2-Drawing_74839b11-03b3-4a86-86fa-dd5cebe5d096.pdf

Comment & Rating (160)

@adamcbrown48

Fantastic model! Hear me out...I need a middle finger option...for reasons. Pretty please. My modeling skills are lacking, and yours are clearly not because its awesome

(Edited)

The designer has replied

@MakeAPrint246

😄😄😄 I will work on it soon. Thank you

@adamcbrown48

Replying to @MakeAPrint246 :

Just like a variety of hands, I will print them all lol he is coming to live at work with me and I need options depending on how I feel that day 😂

@MakeAPrint246

Replying to @adamcbrown48 :

I have added a few new variants to the STL data. Have fun printing :)

@jwilliford

Pure greatness!!! Good job. Do you have any way to send you a donation? ⭐⭐⭐⭐⭐⭐

(Edited)

The designer has replied

@MakeAPrint246

Looks great! 👍 Thank you for sharing. (PS: the feet are upside down) A Donation ist not necessary, a Download and a good Rating are enough. Thanks 😉

@natalieamitchel

right? I would donate as well!

@jwilliford

Replying to @MakeAPrint246 :

I found a way to give you more than 5 stars....⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐ Thank you. I will correct the feet...🤣🤣🤣🤣

@user_812989628

Print Profile

0.16mm layer, 3 walls, 30% infill

Turned out beautifully He’s not the brightest, though

@kallan

bwahahahahahhahaha

@Bobo69

Awesome model! at 500% his joints were a little tough to connect. I had to heat them up first. he rides shotgun with me in the car and I got this picture at Bring Your Robot to Work day. Lots of fun!!

The designer has replied

@MakeAPrint246

Wooow, that looks great! 🤩 Thank you for printing and sharing. Really nice idea to print it that big! 👍

@akolp77

Such a fun print!!! Scalable however use a little heat to put the joints together. Thank you for an awesome model!!

The designer has replied

@MakeAPrint246

Woow, looks great 👍 I also want to print it in large, soon. Thank you very much, for sharing! 😉

@GChannel

Amazing model, printer profile, and everything! This truly was ETP (Easy-to-Print)! My 8 year old requested this one. He really likes all the action figures and this one took just about 3.5-4 hrs to print all the parts. The 3MF file just worked with no tweaking at all... I mean nothing aside from selecting my printer type and filament. I used the first Print Profile in the List (0.16mm layer, 3 walls, 30% infill) on my X1C. My AMS is out of commission so I printed the 3 different colors (white, black, green) on 3 separate plates and just reloaded the filament for each plate. Each piece came right off the cool plate with ease and the brims and support just fell off with minimal sanding/tweaking. I've never set the cool plate to that high before (55 C) and that first layer held so well (I also cleaned and used a glue stick to be safe). I also used a white paint marker for the eyes (since no AMS). I used Bambu Matte PLA for white and black parts and basic PLA for the green center piece. This was so fun and easy that I just started printing 3 more sets for my older son and 2 friends' kids who are visiting. We will make assembly & post assembly action a little activity for them all. Thank you again for all the time you put into this model and printer profiles.