Lagoa Labs NFC business card
Copyright Claim
Lagoa Labs NFC business card
Boost
29
57
6
Print Profile(1)
0.28mm layer, 2 walls, 10% infill
Designer
1.8 h
1 plate
Boost
29
57
6
0
89
12
Released
Description
I was playing around with NFC tags and figured it'd be a cool way to upgrade my otherwise boring business cards.
The printer will stop at layer 7 automatically in order to allow you to put the NFC tag on the card.
Make sure that the stickers are thin (aliexpress sells hundreds for cheap) as the printer will close the area where the tag is placed on layer 7. I've had success with all sorts of materials but PETG seems most finicky to get printing/bridging just right.
I TYPICALLY PRINT HOT AND FAST FINISHING 1 PLATE EVERY +/- 60 MINUTES.
So far PLA Marble has been my favorite as it allows for the fastest printing with the most nice looking result.
Comment & Rating (6)
All
How could I edit the name to be my own name
1
Reply
Nice!
I was overwhelmed by this idea, so i created my own (pretty straight forward in Fusion 360)
https://makerworld.com/en/models/141085
1
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Very clean and nice print.
(Edited)0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld