Dry & Dry Scooper Dooper by YelTrik Designs - Click FOLLOW

YelTrik Designs - Click FOLLOW

3D Printer>3D Printer Accessories

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

PETG 0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

5.0(6)

0.2mm layer, 2 walls, 15% infill

56 min

1 plate

5.0(3)

Boost

Released

Description

Introducing the “Scooper Dooper”!

This handy scoop makes scooping up Dry & Dry Silica Gel Pellets quick, easy, and most importantly, without the mess of pellets bouncing all over the place! Keep your children and pets safe and retain your sanity with the “Scooper Dooper”!

Make sure you check out the Fill Funnel and the Pour Funnel to complete the tools needed to have a no mess silica desiccant experience:

>>> Check out my Fill Funnel by clicking here <<<

>>> Check out my Pour funnel by clicking here! <<<

Below is my Fill Funnel - Screws on the Dry & Dry Bottle

Below is my Pour Funnel - Screws on the Dry & Dry Bottle

Comment & Rating (14)

@Jwa0289

Print Profile

PETG 0.2mm layer, 2 walls, 15% infill

love this! Everything prints fine and it makes recharging silica beads so much easier. I ended up printed out his entire collection!

The designer has replied

@YelTrikDesigns

Thank you for the 5 star rating! Make sure you check out my other models and Bambu Printer Accessories. More on the way, so follow me for updates.

@VSC42

Print Profile

0.2mm layer, 2 walls, 15% infill

Easy to scoop up the desiccant

@LongracksLabs

Print Profile

PETG 0.2mm layer, 2 walls, 15% infill

@gamersnowman

Print Profile

PETG 0.2mm layer, 2 walls, 15% infill

The designer has replied

@YelTrikDesigns

Thank you for the feedback and 5 star rating! Make sure to check out my other models and Bambu Printer Accessories. More to come so LIKE and FOLLOW to get updates. Thanks again!

@grumpychocobo

Print Profile

PETG 0.2mm layer, 2 walls, 15% infill

The designer has replied

@YelTrikDesigns

Thank you for the feedback and 5 star rating! Make sure to check out my other models and Bambu Printer Accessories. More to come so LIKE and FOLLOW to get updates. Thanks again!

@TheKrampers

Print Profile

PETG 0.2mm layer, 2 walls, 15% infill

The designer has replied

@YelTrikDesigns

Thank you for the 5 star rating! Make sure you check out my other models and Bambu Printer Accessories. More on the way, so LIKE and FOLLOW for updates.

@ldubyathree

Print Profile

0.2mm layer, 2 walls, 15% infill

Works as intended to scoop out the loose desiccant beads in the bottom of the tote i use as a filament dry box.

@bellini13

Print Profile

PETG 0.2mm layer, 2 walls, 15% infill

The designer has replied

@YelTrikDesigns

Thank you for the 5 star rating! Make sure you check out my other models and Bambu Printer Accessories. More on the way, so LIKE and FOLLOW for updates.

@Sean0926

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.