Design created from a sketch inspired by the Mr Beast Logo seen on the internet.

· Design for 4 colors.

· 3 mm hole to put keychain.

You can download the STL in “Raw Model Files” to be able to print on any other printer with M600 / color change.
at 3 mm one color, at 3.40 mm another color, 3.80 mm another color and at 4 mm another color.

Disclaimer: The Mr Beast Logo and all related imagery are the property of their respective owners, including but not limited to Mr Beast. This design does not claim any ownership or association with the intellectual property of Mr Beast. The use of the Logo is solely for the purpose of this design and does not imply any endorsement or sponsorship by Mr Beast. All copyrights, trademarks, and other intellectual property rights pertaining to Mr Beast and associated elements are acknowledged and reserved by their rightful owners.

I acknowledge and respect the intellectual property of all brands mentioned in this design. If you think this design infringes on the ownership rights of the trademark, please submit a copyright complaint, and this design will be removed immediately.