Flag, AR-15, and The 2nd. Amendment Shall not be infringed… A little patriotic Themed Hueforge print. :) Enjoy

this is a 4 color, but changes back a few times to get the effect that I wanted, pretty easy to do with and AMS. I would recommend using a darker blue, but I didn't have one available at the time of printing.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Sky Blue Transmission Distance: 8.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Sky Blue
At layer #5 (0.48mm) swap to Red
At layer #8 (0.72mm) swap to Black
At layer #14 (1.2mm) swap to White
At layer #19 (1.6mm) swap to Black
At layer #21 (1.76mm) swap to White for the rest.