Poop Deflector (A1 + A1 Mini) by ThreeD-Michael

ThreeD-Michael

3D Printer>3D Printer Accessories

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Poop Deflector

Designer

17 min

1 plate

4.9(478)

Ironing + 0.1mm layer, 3 walls etc.

32 min

1 plate

5.0(57)

PETG ~ 24mins ~ 4g ~ 0.2mm layer, 2 walls, 15% infill

25 min

1 plate

5.0(2)

0.6mm nozzle, 0.18mm layer, 2 walls, 15% infill

18 min

1 plate

Boost

586

1062

620

3.3 k

2.8 k

Released

Description

Poop Deflector for Bambulab A1 and A1 Mini

I know there are already poop deflector designs online. I tried a few but didn't like them because they were either too brittle and/or lacked a proper attachment. That's why I created my own design, which offers the following advantages:

secure fixation,
stabilized deflector,
stable walls,
easy and quick printing,
only 4g weight.

Since I've been using this deflector, no poop has missed the basket...

Assembly:

Carefully click the poop deflector onto the purge wiper. Place a collecting container under the deflector and make sure that the deflector cannot touch the container in the lowest z position of the printer.

Comment & Rating (620)

@hardermods

noticed some pla is still hot and sticks to it, added a piece of aluminum tape to prevent that. works great

@autofctrl

Print Profile

PETG ~ 24mins ~ 4g ~ 0.2mm layer, 2 walls, 15% infill

Printed for my 2 A1 Mini - Fits Perfect!! Thx :)

The designer has replied

@TheGooser

thanks!

@johnbcs

Boosted

An excellent design, nicely done! It printed beautifully in Bambu PLA Basic. I added some kapton tape to prevent sticking.

The designer has replied

@ThreeDMichael

In the early years of 3D printing, Kapton tape was glued to the print bed to increase adhesion. That's why I would have some doubts as to whether it's the right material for the poop deflector. I use the deflector on one printer without stickers and on a second one with self-adhesive aluminum foil. But since poops don't stick to either of them, I can't make a recommendation here.

@21josefelix

Print Profile

Ironing + 0.1mm layer, 3 walls etc.

Rápido y de ajuste perfecto. Lo he impreso en PLA porque no tengo PTEG, funciona aunque alguno se ha quedado pegado. Le pondré una capa de aluminio como he visto que ha hecho otra persona así evito las pegaduras del PLA.

@MustachePrinter

Print Profile

Ironing + 0.1mm layer, 3 walls etc.

works very well and haven't had any issues whatsoever, had to print the deflector in PETG though so the filament wouldn't stick to it

@Tezg79

Print Profile

Ironing + 0.1mm layer, 3 walls etc.

printed well thanks

@smashd

Print Profile

Ironing + 0.1mm layer, 3 walls etc.

printed in PETG so PLA wouldn't stick sometimes 😄

(Edited)

@BackToSloth

Print Profile

Poop Deflector

gotta wait till it cools or it will bend easy lol

@Revenge

Print Profile

Poop Deflector

bello semplice e preciso

(Edited)

@KlemK

Print Profile

Poop Deflector

Great print. Even better with multi color. Thanks.

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.