Skip to content

Complete set cobblestone square bases

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 975 views
  • 2 likes
  • 10 downloads
  • 1 collection
License
Usages
3D design format
11 files (ZIP) Close
  • 100x150mm.zip
    • 100x150mm base1.lys
    • 100x150mm base1.stl
    • 100x150mm base1-supported.stl
    • 100x150mm base2.lys
    • 100x150mm base2.stl
    • 100x150mm base2-supported.stl
    • 100x150mm base3.lys
    • 100x150mm base3.stl
    • 100x150mm base3-supported.stl
    • 100x150mm base4.lys
    • 100x150mm base4.stl
    • 100x150mm base4-supported.stl
  • 25mm.zip
    • 25mm base 1.lys
    • 25mm base 1.stl
    • 25mm base 10.lys
    • 25mm base 10.stl
    • 25mm base 10-supported.stl
    • 25mm base 11.lys
    • 25mm base 11.stl
    • 25mm base 11-supported.stl
    • 25mm base 12.lys
    • 25mm base 12.stl
    • 25mm base 12-supported.stl
    • 25mm base 13.lys
    • 25mm base 13.stl
    • 25mm base 13-supported.stl
    • 25mm base 14.lys
    • 25mm base 14.stl
    • 25mm base 14-supported.stl
    • 25mm base 15.lys
    • 25mm base 15.stl
    • 25mm base 15-supported.stl
    • 25mm base 16.lys
    • 25mm base 16.stl
    • 25mm base 16-supported.stl
    • 25mm base 17.lys
    • 25mm base 17.stl
    • 25mm base 17-supported.stl
    • 25mm base 18.lys
    • 25mm base 18.stl
    • 25mm base 18-supported.stl
    • 25mm base 19.lys
    • 25mm base 19.stl
    • 25mm base 19-supported.stl
    • 25mm base 1-supported.stl
    • 25mm base 2.lys
    • 25mm base 2.stl
    • 25mm base 20.lys
    • 25mm base 20.stl
    • 25mm base 20-supported.stl
    • 25mm base 21.lys
    • 25mm base 21.stl
    • 25mm base 21-supported.stl
    • 25mm base 22.lys
    • 25mm base 22.stl
    • 25mm base 22-supported.stl
    • 25mm base 23.lys
    • 25mm base 23.stl
    • 25mm base 23-supported.stl
    • 25mm base 24.lys
    • 25mm base 24.stl
    • 25mm base 24-supported.stl
    • 25mm base 25.lys
    • 25mm base 25.stl
    • 25mm base 25-supported.stl
    • 25mm base 26.lys
    • 25mm base 26.stl
    • 25mm base 26-supported.stl
    • 25mm base 27.lys
    • 25mm base 27.stl
    • 25mm base 27-supported.stl
    • 25mm base 28.lys
    • 25mm base 28.stl
    • 25mm base 28-supported.stl
    • 25mm base 29.lys
    • 25mm base 29.stl
    • 25mm base 29-supported.stl
    • 25mm base 2-supported.stl
    • 25mm base 3.lys
    • 25mm base 3.stl
    • 25mm base 30.lys
    • 25mm base 30.stl
    • 25mm base 30-supported.stl
    • 25mm base 31.lys
    • 25mm base 31.stl
    • 25mm base 31-supported.stl
    • 25mm base 32.lys
    • 25mm base 32.stl
    • 25mm base 32-supported.stl
    • 25mm base 33.lys
    • 25mm base 33.stl
    • 25mm base 33-supported.stl
    • 25mm base 34.lys
    • 25mm base 34.stl
    • 25mm base 34-supported.stl
    • 25mm base 35.lys
    • 25mm base 35.stl
    • 25mm base 35-supported.stl
    • 25mm base 36.lys
    • 25mm base 36.stl
    • 25mm base 36-supported.stl
    • 25mm base 37.lys
    • 25mm base 37.stl
    • 25mm base 37-supported.stl
    • 25mm base 38.lys
    • 25mm base 38.stl
    • 25mm base 38-supported.stl
    • 25mm base 39.lys
    • 25mm base 39.stl
    • 25mm base 39-supported.stl
    • 25mm base 3-supported.stl
    • 25mm base 4.lys
    • 25mm base 4.stl
    • 25mm base 40.lys
    • 25mm base 40.stl
    • 25mm base 40-supported.stl
    • 25mm base 41.lys
    • 25mm base 41.stl
    • 25mm base 41-supported.stl
    • 25mm base 42.lys
    • 25mm base 42.stl
    • 25mm base 42-supported.stl
    • 25mm base 43.lys
    • 25mm base 43.stl
    • 25mm base 43-supported.stl
    • 25mm base 44.lys
    • 25mm base 44.stl
    • 25mm base 44-supported.stl
    • 25mm base 45.lys
    • 25mm base 45.stl
    • 25mm base 45-supported.stl
    • 25mm base 4-supported.stl
    • 25mm base 5.lys
    • 25mm base 5.stl
    • 25mm base 5-supported.stl
    • 25mm base 6.lys
    • 25mm base 6.stl
    • 25mm base 6-supported.stl
    • 25mm base 7.lys
    • 25mm base 7.stl
    • 25mm base 7-supported.stl
    • 25mm base 8.lys
    • 25mm base 8.stl
    • 25mm base 8-supported.stl
    • 25mm base 9.lys
    • 25mm base 9.stl
    • 25mm base 9-supported.stl
  • 25x50.zip
    • 25x50 base1.lys
    • 25x50 base1.stl
    • 25x50 base10.lys
    • 25x50 base10.stl
    • 25x50 base10-supported.stl
    • 25x50 base1-supported.stl
    • 25x50 base2.lys
    • 25x50 base2.stl
    • 25x50 base2-supported.stl
    • 25x50 base3.lys
    • 25x50 base3.stl
    • 25x50 base3-supported.stl
    • 25x50 base4.lys
    • 25x50 base4.stl
    • 25x50 base4-supported.stl
    • 25x50 base5.lys
    • 25x50 base5.stl
    • 25x50 base5-supported.stl
    • 25x50 base6.lys
    • 25x50 base6.stl
    • 25x50 base6-supported.stl
    • 25x50 base7.lys
    • 25x50 base7.stl
    • 25x50 base7-supported.stl
    • 25x50 base8.lys
    • 25x50 base8.stl
    • 25x50 base8-supported.stl
    • 25x50 base9.lys
    • 25x50 base9.stl
    • 25x50 base9-supported.stl
  • 30mm.zip
    • 30mm base 1.lys
    • 30mm base 1.stl
    • 30mm base 10.lys
    • 30mm base 10.stl
    • 30mm base 10-supported.stl
    • 30mm base 11.lys
    • 30mm base 11.stl
    • 30mm base 11-supported.stl
    • 30mm base 12.lys
    • 30mm base 12.stl
    • 30mm base 12-supported.stl
    • 30mm base 13.lys
    • 30mm base 13.stl
    • 30mm base 13-supported.stl
    • 30mm base 14.lys
    • 30mm base 14.stl
    • 30mm base 14-supported.stl
    • 30mm base 15.lys
    • 30mm base 15.stl
    • 30mm base 15-supported.stl
    • 30mm base 16.lys
    • 30mm base 16.stl
    • 30mm base 16-supported.stl
    • 30mm base 17.lys
    • 30mm base 17.stl
    • 30mm base 17-supported.stl
    • 30mm base 18.lys
    • 30mm base 18.stl
    • 30mm base 18-supported.stl
    • 30mm base 19.lys
    • 30mm base 19.stl
    • 30mm base 19-supported.stl
    • 30mm base 1-supported.stl
    • 30mm base 2.lys
    • 30mm base 2.stl
    • 30mm base 20.lys
    • 30mm base 20.stl
    • 30mm base 20-supported.stl
    • 30mm base 21.lys
    • 30mm base 21.stl
    • 30mm base 21-supported.stl
    • 30mm base 22.lys
    • 30mm base 22.stl
    • 30mm base 22-supported.stl
    • 30mm base 23.lys
    • 30mm base 23.stl
    • 30mm base 23-supported.stl
    • 30mm base 24.lys
    • 30mm base 24.stl
    • 30mm base 24-supported.stl
    • 30mm base 25.lys
    • 30mm base 25.stl
    • 30mm base 25-supported.stl
    • 30mm base 26.lys
    • 30mm base 26.stl
    • 30mm base 26-supported.stl
    • 30mm base 27.lys
    • 30mm base 27.stl
    • 30mm base 27-supported.stl
    • 30mm base 28.lys
    • 30mm base 28.stl
    • 30mm base 28-supported.stl
    • 30mm base 29.lys
    • 30mm base 29.stl
    • 30mm base 29-supported.stl
    • 30mm base 2-supported.stl
    • 30mm base 3.lys
    • 30mm base 3.stl
    • 30mm base 30.lys
    • 30mm base 30.stl
    • 30mm base 30-supported.stl
    • 30mm base 31.lys
    • 30mm base 31.stl
    • 30mm base 31-supported.stl
    • 30mm base 32.lys
    • 30mm base 32.stl
    • 30mm base 32-supported.stl
    • 30mm base 33.lys
    • 30mm base 33.stl
    • 30mm base 33-supported.stl
    • 30mm base 34.lys
    • 30mm base 34.stl
    • 30mm base 34-supported.stl
    • 30mm base 35.lys
    • 30mm base 35.stl
    • 30mm base 35-supported.stl
    • 30mm base 36.lys
    • 30mm base 36.stl
    • 30mm base 36-supported.stl
    • 30mm base 37.lys
    • 30mm base 37.stl
    • 30mm base 37-supported.stl
    • 30mm base 38.lys
    • 30mm base 38.stl
    • 30mm base 38-supported.stl
    • 30mm base 39.lys
    • 30mm base 39.stl
    • 30mm base 39-supported.stl
    • 30mm base 3-supported.stl
    • 30mm base 4.lys
    • 30mm base 4.stl
    • 30mm base 4-supported.stl
    • 30mm base 5.lys
    • 30mm base 5.stl
    • 30mm base 5-supported.stl
    • 30mm base 6.lys
    • 30mm base 6.stl
    • 30mm base 6-supported.stl
    • 30mm base 7.lys
    • 30mm base 7.stl
    • 30mm base 7-supported.stl
    • 30mm base 8.lys
    • 30mm base 8.stl
    • 30mm base 8-supported.stl
    • 30mm base 9.lys
    • 30mm base 9.stl
    • 30mm base 9-supported.stl
  • 30x60mm.zip
    • 30x60mm base 1.lys
    • 30x60mm base 1.stl
    • 30x60mm base 10.lys
    • 30x60mm base 10.stl
    • 30x60mm base 10-supported.stl
    • 30x60mm base 11.lys
    • 30x60mm base 11.stl
    • 30x60mm base 11-supported.stl
    • 30x60mm base 12.lys
    • 30x60mm base 12.stl
    • 30x60mm base 12-supported.stl
    • 30x60mm base 13.lys
    • 30x60mm base 13.stl
    • 30x60mm base 13-supported.stl
    • 30x60mm base 14.lys
    • 30x60mm base 14.stl
    • 30x60mm base 14-supported.stl
    • 30x60mm base 15.lys
    • 30x60mm base 15.stl
    • 30x60mm base 15-supported.stl
    • 30x60mm base 16.lys
    • 30x60mm base 16.stl
    • 30x60mm base 16-supported.stl
    • 30x60mm base 17.lys
    • 30x60mm base 17.stl
    • 30x60mm base 17-supported.stl
    • 30x60mm base 18.lys
    • 30x60mm base 18.stl
    • 30x60mm base 18-supported.stl
    • 30x60mm base 19.lys
    • 30x60mm base 19.stl
    • 30x60mm base 19-supported.stl
    • 30x60mm base 1-supported.stl
    • 30x60mm base 2.lys
    • 30x60mm base 2.stl
    • 30x60mm base 20.lys
    • 30x60mm base 20.stl
    • 30x60mm base 20-supported.stl
    • 30x60mm base 2-supported.stl
    • 30x60mm base 3.lys
    • 30x60mm base 3.stl
    • 30x60mm base 3-supported.stl
    • 30x60mm base 4.lys
    • 30x60mm base 4.stl
    • 30x60mm base 4-supported.stl
    • 30x60mm base 5.lys
    • 30x60mm base 5.stl
    • 30x60mm base 5-supported.stl
    • 30x60mm base 6.lys
    • 30x60mm base 6.stl
    • 30x60mm base 6-supported.stl
    • 30x60mm base 7.lys
    • 30x60mm base 7.stl
    • 30x60mm base 7-supported.stl
    • 30x60mm base 8.lys
    • 30x60mm base 8.stl
    • 30x60mm base 8-supported.stl
    • 30x60mm base 9.lys
    • 30x60mm base 9.stl
    • 30x60mm base 9-supported.stl
  • 40mm-1.zip
    • 40mm base 1.lys
    • 40mm base 1.stl
    • 40mm base 1-supported.stl
    • 40mm base 2.lys
    • 40mm base 2.stl
    • 40mm base 2-supported.stl
    • 40mm base 3.lys
    • 40mm base 3.stl
    • 40mm base 3-supported.stl
    • 40mm base 4.lys
    • 40mm base 4.stl
    • 40mm base 4-supported.stl
    • 40mm base 5.lys
    • 40mm base 5.stl
    • 40mm base 5-supported.stl
    • 40mm base 6.lys
    • 40mm base 6.stl
    • 40mm base 6-supported.stl
    • 40mm base 7.lys
    • 40mm base 7.stl
    • 40mm base 7-supported.stl
    • 40mm base 8.lys
    • 40mm base 8.stl
    • 40mm base 8-supported.stl
  • 40x60mm-1.zip
    • 40x60mm base 1.lys
    • 40x60mm base 1.stl
    • 40x60mm base 1-supported.stl
    • 40x60mm base 2.lys
    • 40x60mm base 2.stl
    • 40x60mm base 2-supported.stl
    • 40x60mm base 3.lys
    • 40x60mm base 3.stl
    • 40x60mm base 3-supported.stl
    • 40x60mm base 4.lys
    • 40x60mm base 4.stl
    • 40x60mm base 4-supported.stl
    • 40x60mm base 5.lys
    • 40x60mm base 5.stl
    • 40x60mm base 5-supported.stl
    • 40x60mm base 6.lys
    • 40x60mm base 6.stl
    • 40x60mm base 6-supported.stl
  • 50mm.zip
    • 50mm base 1.lys
    • 50mm base 1.stl
    • 50mm base 1-supported.stl
    • 50mm base 2.lys
    • 50mm base 2.stl
    • 50mm base 2-supported.stl
    • 50mm base 3.lys
    • 50mm base 3.stl
    • 50mm base 3-supported.stl
    • 50mm base 4.lys
    • 50mm base 4.stl
    • 50mm base 4-supported.stl
    • 50mm base 5.lys
    • 50mm base 5.stl
    • 50mm base 5-supported.stl
    • 50mm base 6.lys
    • 50mm base 6.stl
    • 50mm base 6-supported.stl
  • 50x100mm.zip
    • 50x100mm base 1.lys
    • 50x100mm base 1.stl
    • 50x100mm base 1-supported.stl
    • 50x100mm base 2.lys
    • 50x100mm base 2.stl
    • 50x100mm base 2-supported.stl
    • 50x100mm base 3.lys
    • 50x100mm base 3.stl
    • 50x100mm base 3-supported.stl
    • 50x100mm base 4.lys
    • 50x100mm base 4.stl
    • 50x100mm base 4-supported.stl
    • 50x100mm base 5.lys
    • 50x100mm base 5.stl
    • 50x100mm base 5-supported.stl
    • 50x100mm base 6.lys
    • 50x100mm base 6.stl
    • 50x100mm base 6-supported.stl
  • 50x75mm-1.zip
    • 50x75mm base 1.lys
    • 50x75mm base 1.stl
    • 50x75mm base 1-supported.stl
    • 50x75mm base 2.lys
    • 50x75mm base 2.stl
    • 50x75mm base 2-supported.stl
    • 50x75mm base 3.lys
    • 50x75mm base 3.stl
    • 50x75mm base 3-supported.stl
    • 50x75mm base 4.lys
    • 50x75mm base 4.stl
    • 50x75mm base 4-supported.stl
  • 60x100mm.zip
    • 60x100mm base 1.lys
    • 60x100mm base 1.stl
    • 60x100mm base 1-supported.stl
    • 60x100mm base 2.lys
    • 60x100mm base 2.stl
    • 60x100mm base 2-supported.stl
    • 60x100mm base 3.lys
    • 60x100mm base 3.stl
    • 60x100mm base 3-supported.stl
    • 60x100mm base 4.lys
    • 60x100mm base 4.stl
    • 60x100mm base 4-supported.stl

Learn more about the formats
Last update 2024-02-08 at 03:40
Publication date 2024-01-27 at 06:30
Design number 1741839
Todfthr

Todfthr

3D printer file info

3D model description

The Complete set of cobblestone bases. 152 bases in total. Every base in the set is different.
Base underside has a 1mm space to fit 1mm neodymium magnets or sheet magnet.

Bases come supported and unsupported. .lys files included for Lychee users.

45 - 25mm square
39 -30mm
8 - 40mm
6 - 50mm
10 - 25x50mm rectangle
20 - 30x60mm
6 - 40x60mm
4 - 50x75mm
6 - 50x100mm
4 - 60x100mm
4 - 100x150mm

3D printing settings

Print settings I used in pictures.

Categories

All designs β€Ί Game β€Ί RPG tabletop / Board games / Toys

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.