Bed Level Test by Quastra

Quastra
3D Printer>Test Models
Copyright Claim

Bed Level Test by Quastra

Quastra
Boost
17
54
81

Print Profile(1)

All
P1P
P1S
X1
X1 Carbon
X1E
A1
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
27 min
1 plate
4.9(78)
Boost
17
54
81
0
555
703
Released

Description

Da die Bambu Lab Druckbetten nicht immer gerade sind, habe ich schnell mal einen First Layer Test gemacht, der nahezu über das gesamte Druckbett geht.

Bitte die Flow Kalibrierung ausschalten, da ansonsten über die Kalibrierung gedruckt wird.

 

Since the Bambu Lab print beds are not always straight, I quickly did a first layer test that covers almost the entire print bed.Please switch off the flow calibration, otherwise the calibration will be used to print.

 

bed level test drucktest

Comment & Rating (81)

Please fill in your opinion
(0/5000)
level
@nennyboy
The Printer definitely needs to be checked
1
Reply
level
@juanclazaro
Print Profile
0.2mm layer, 2 walls, 15% infill
Thanks a lot for this design. Could you help me understand the result I got?
0
Reply
level
@aidanhartmann34
Print Profile
0.2mm layer, 2 walls, 15% infill
used this to level my a1 heatbed after a new install, worked great, thank you.
0
Reply
level
@user_3949758773
Print Profile
0.2mm layer, 2 walls, 15% infill
Ok
0
Reply
level
@sivasundar1220
Print Profile
0.2mm layer, 2 walls, 15% infill
GOOD
0
Reply
level
@sirfragalot
Print Profile
0.2mm layer, 2 walls, 15% infill
it's the same as all the others, but worked well after I trammed the bed
0
Reply
level
@chriskillen
Print Profile
0.2mm layer, 2 walls, 15% infill
Profile worked great, thank you!
0
Reply
level
@Dannyrose
Came out PERFECT on my X1C!
0
Reply
level
@DRCGRAPIX
Print Profile
0.2mm layer, 2 walls, 15% infill
came it good
0
Reply
level
@mdkjuss
Print Profile
0.2mm layer, 2 walls, 15% infill
Works fine.
0
Reply

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Donkey Kong Level 1

Donkey Kong Level 1

Fletch
11
275
239
Space Invaders Level 1

Space Invaders Level 1

Fletch
5
83
58
Pac-Man Level 1

Pac-Man Level 1

Fletch
43
558
507
First Layer Test 0.2 mm Various Bed Measures

First Layer Test 0.2 mm Various Bed Measures

Mako3Design
0
6
19
PrivacyTermsGuidelinesFAQCookie PolicyCookie Settings
© 2024 MakerWorld