This filament spool subdivider drops into Bambu Lab-spools to allow storage of three different types of filament in one spool. This is an efficient and useful way to store leftovers or samples of filament of up to about 250g.
This remix is reverse engineered and redrawn from scratch from @giuliolibrando's Bambu Lab Modular Multi Filament Spool.
The most important features of this remix are:
The two halves of a subdivider screws together and is slid onto an empty Bambu Lab spool (without the cardboard part).
Please see the original model for very cool assembly instructions HERE.
The remixed model is compatible side by side with the original model, but they can not be screwed together with the original halves.
If the threads are too tight or too loose, you can try adjusting the thread_clearance in steps of 0,010 - 0,005mm.
The halves might need to be screwed forwards and backwards a few times in order to run easily.
Print Settings:
The subdividers in the images are printed without support from 'Dutch Filament (MCPP) Light Grey ASA-X' at 0.23mm layer height with a 0.4mm nozzle on a Bambu Lab X1C. In order to improve the quality of the threads, the model is printed with variable layer height set to 0.25 (Quality / Speed-slider)
Do you enjoy my work?
Feedback, makes and ratings are much appreciated. I'd love to see what you have printed and hear about your exciting builds.
Check out my other models on my profile by clicking HERE.
Please support the original creator by checking out their models HERE.