Army Painter and Vallejo Drawer Based Bottle Holders for Harbor Freight Yukon Workbench
Copyright Claim
Army Painter and Vallejo Drawer Based Bottle Holders for Harbor Freight Yukon Workbench
Boost
83
207
28
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
5.7 h
1 plate
Boost
83
207
28
3
296
167
Released
Description
This is a set of leaning bottle holders designed to fit in the drawer of the Harbor Freight Yukon workbench. They will hold Army Painter and Vallejo miniature paint bottles. The drawer I designed them for is approximately 18" L x 20" W x 2.5" T. These holders will fit in any drawer that is 2.5" tall or taller. I've included a model that is 4x4 for easy printing to hold 16 bottles, as well as the single holder that can be copied and arranged to print any size you may need. They also work well for keeping your paint organized while you're painting and not falling all over in different spots in your work area.
Comment & Rating (28)
All
I think I need more to print
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
good work !
0
Reply
Boosted
Printed without issue. Also fit AK Interactive bottles and the holder + bottles fit in the shallow drawer of an Ikea LAGKAPTEN / ALEX desk.
(Edited)
0
Reply
Great files. Can confirm that 20ml bottles off of Amazon fit fine, and that four of the racks fit nicely on a standard sized food service tray with room for other bottles.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
came out perfect, printed with PETG on ludicrous speed so there was a bit of stringing but that was expected!
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Forgot to get a picture but these worked great. Unsurprising given that I'm using the same paints and workbench.
The designer has replied
1
Reply
Awesome! I figured I wouldn't be the only one.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
the print is good but it would be better if manual supports were added at every bottle position. at the back side of every bottle holder is not printed flat, because of overhang
The designer has replied
0
Reply
Thanks for the feedback, but there's zero reason for me to waste people's print time and material for aesthetics on a print where looks serve no function and that no one will ever see. People have the ability to download the STL and add support themselves if they choose.
(Edited)1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
held the stuff but some stringing
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
cool system ! maybe adding a larger space for bigger bottle at the back
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Thx !!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld