Multipurpose SPOOL, BambuStudio -Ready!
A combined version and a remix of Brandido02' and chsi76' HEX SPOOL!

Recently(12/14/23), Brandido02 added a filament scale(or ruler) to his creation. This can be found on this print as well!

Why a new remix?
In this model there is everything you need + a little more. Including: A strong and stable hex design for minimal material use, friction lock for re-spooling and securing your filament while storing your spool on ALL 4 sides for easy access, a smooth white plate for the “see through BambuLab refill sticker” and much more!
The re-spooling friction holes on the middle is a completely new addition this this spool!

The 2'nd Print Profile is designed for a colorized print (Except white. see the first Print Profile for the “clean version”)

Of course you can print everything in the same color! The only thing that is black on the first print profile are the numbers on the filament scale/ruler! Feel free to edit the pallet on the first print profile!

• Print time: 2h48m (including both sides of the spool!)
• LH: 0.3mm
• Infill: 10% (The new re-spooling holes provide even more stability than before!)
• Nozzle: 0,4mm
• Walls: 2
  

-Brandido02: “Note: the spacing shim goes on the inside of the spool to lock the two halves together. Though I haven't needed it because they lock together pretty tight. But Bambu recommends it, so I included it.”

If you are using any filament branding other than BBS - Follow the nozzle and build plate temperature recommendation by the company you're using to prevent warping, stringing, etc'!