Ultimate Magnetic Cable Clips Holder by michelem

michelem

Household>Office

GIF

Print Profile(7)

All

P1S

P1P

X1 Carbon

X1E

3 Clips AMS required

Designer

1.9 h

3 plates

4.8(12)

3 Clips 10mm magnets

Designer

2.2 h

3 plates

5.0(6)

Table mount for 3 and 5 clips

Designer

1.5 h

2 plates

5.0(4)

5 Clips AMS

Designer

2.8 h

3 plates

4.3(3)

Click to see more

Boost

401

760

325

334

Released

Description

Ultimate Magnetic Cable Clips Holder

Introducing this cutting-edge 3D model – a sleek organizational solution for your cables!

Crafted with precision, the base features strategically placed holes for easy hanging or secure adhesive mounting.

The accompanying cover is designed with three removable magnets and three different clips, catering to various cable sizes, from USB to HDMI.

Experience the magic as your cables seamlessly thread through the clips, each equipped with its own magnet. Watch as they effortlessly snap into place on the base, creating a clutter-free and visually pleasing setup.

Say goodbye to cable chaos and embrace the future of organized simplicity!

Print

No support needed

We recommend a minimum resolution of 0.16mm

CLIPS SHOULD BE PRINTED IN TPU

For the Cover there are two version one with colored circles that requires AMS and one single color to be used with any printer.

BOM (Bill of Materials)

6 magnets of 12x2mm
Double-sided adhesive or screws for mounting

Assembly

Take the cover and place it face down, insert 3 magnets of 12mm in diameter (max 4mm thickness), no need for glue!

Now take the base and insert the cover over it until everything is in position.

Finally, take the clips and slide a 12x2mm magnet into the designated slot. Again, no need for glue, and you can easily retrieve the magnets in the future.

Finally, use a bit of double-sided adhesive under the base to secure everything where you prefer. If you want (and before inserting the cover), there are 2 convenient screw holes to fix it wherever you want!

And that's it.

Update 22 Jan 2024

Now available with 3 or 5 clips
Added table mount

Update 08 Feb 2024

Added 10mm magnets version

Comment & Rating (37)

@Adge

Print Profile

5 Clips 10mm magnets

Perfect design and print. As I have neither TPU available nor experience in printing TPU. I made the caps in two parts to be able to print them in PLA/PETG/etc.

The designer has replied

@michelem

That's great! If you'd like make a remix of my model

(Edited)

@Kirumi

Good job, it would be greate if you can upload this extension :)

(Edited)

@Adge

Replying to @Kirumi :

@michelem / @Kirumi Thanks for the feedback - I uploaded the design today. Hope you will like it. https://makerworld.com/en/models/416991#profileId-319328

(Edited)

@nfetaih

Print Profile

3 Clips 10mm magnets

Everything looks great! Even without an AMS, I can still see the targets a bit, super cool in black. And thank you so much for adding the 10x2mm magnet version! I really appreciate it!

(Edited)