AMS Humidity Sensor Holder
Copyright Claim
AMS Humidity Sensor Holder
Boost
51
92
31
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
55 min
1 plate
Boost
51
92
31
0
165
147
Released
Description
If you have boxes for drying in AMS and only need a humidity sensor, this is exactly for you.
Simple holder for a rectangular humidity / temperature sensor with the color BambuLab logo. You can place it between the two center slots.
This type of sensor fits into the holder:
Mini Digital LCD Humidity / Temperature Sensor
Thank You!
NOTE: this was designed for the original AMS, I have not tested with Hydra Mods…
Comment & Rating (31)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Can be see easily and look good
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Schöner Druck
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
works great! i like the fact it’s not filled with desiccant. We wondered that a hygrometer stuck in a dry box with desiccant would skew the readings.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
Support Issue:Needed supports for me, as bridge areas were sagging
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
lettering and bambu lab logo is inferior
(Edited)The designer has replied
0
Reply
Thanks for the comment, I've published a redesigned version of the holder, with a new logo and other tweaks...
0
Reply
worked perfectly!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
passt super
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very good. mine came out ugly because I used all black but I have no doubts if it were multi
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Easy quality print for these lil meters.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Awesome! Now it doesn't look like I accidentally dropped a humidity sensor in the AMS!
(Edited)0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld