Nice multicolor print, Delphant model remix.
It's a reverse print, the image will be perfect without ironing. Please remember to keep nozzle clean
You can use the attached 3mf or follow the multicolor guide:
This is the multicolor method:
- open prusaslicer and set 4 extruders (printer settings) - check purge tower (you can keep or deactivate)
- load the base file (capp_base.stl), resize but the height must be 2,5mm
- right click on the base file, add a modifier and load the other 3 files
- resize and align
- you will see 4 material windows. Right click and assign colors to each one. Base must be on White, Capp_nero black, capp_dorato yellow or gold, Capp_rosso must be red. height of these file must be 0,2mm
- ONLY ONE TIME: add to the “printer settings”, “custom gcode”, “tool change gcode” these few lines
;START_CUSTOM_TOOL_CHANGE LAYER
[layer_z] / [layer_num]
{if layer_num >= 0}M600{endif}
;END_CUSTOM_TOOL_CHANGE
the printer will print the black lines (extruder 1) then will print the white color (extruder 2), then the yellow and red
Layer height 0.15 or 0.2, ask me if you need help
Enjoy!