Scaled down version of my P&O Cruise Ship Azura to allow it to fit onto an A1 Mini build plate.

Colours also reduced down to 4 to make it compatible with the AMS lite.

X1C print profile also included - as this was the one I actually used to do the test print.

Designed using Fusion 360 from photos and videos, and a derivate of the P&O Cruises sister Ship Ventura, which I have already made available in 1:500 and 1:1000 scale.

Test prints using Bambu Lab Sponsored Filament.

Model scale is slightly smaller than the P&O Cruises dye cast models available onboard.

Model was test printed on an X1C - (as I do not posses an A1 Mini).

Test print was of the low purge version - which brought purge waste down by over 90% by adding some extra colour-doesn't-matter objects to the build plate to take the purge.

The extra objects included in the print profiles are components of a ‘purge-waste’ 3d printed table I am creating - which will be released on makerworld at some point. A version without the purge-to objects also included in the 2nd plate of each print profile.

Single colour STL file also included - due to the tiny scale I have not done any work on things like intending the text - but I could do this if there is sufficient interest.

I have no connection with P&O Cruises or Carnival Cruises - other than having recently cruising on the ship.

For personal use only, with no remixes permitted due to the branding on the model.

See my Cruise Ship and Make Better use of Purge To threads on the Bambu Lab Forum for more background information about this any my other models.