Paris France 3D Miniature by jarvizar

jarvizar

Miniatures>Architecture

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Designer Profile (0.16mm layer, Grid infill)

Designer

4.8 h

1 plate

4.8(38)

Printable Frame w/ Water (Optional)

Designer

2 h

2 plates

4.9(15)

"Paris" Label (Optional)

Designer

16 min

1 plate

4.8(9)

Only Compact Frame - A1 Mini compatible - 0.24mm layer, 2 walls, 10% infill

1.7 h

2 plates

Click to see more

Boost

178

295

513

524

Released

Description

3d miniature of Paris, France!

Model created in Blender using the Blosm addon.

Check out my collection of other miniature cities: https://makerworld.com/en/u/1935755220/collections/146964

Slicing & Printing Details

This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.

Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!

Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls. Can also try enabling “Detect Thin Walls”.

The included “Designer Profile” should have the above settings pre-applied and is ready to slice & print!

Framing Details

This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.

Personally I use these cheap frames from Amazon: https://www.amazon.com/dp/B0C8HY7YSQ

And blue printer paper: https://www.amazon.com/dp/B00006IDQT

I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.

A frame is not required! This model looks great by itself and can be displayed almost anywhere.

See my Patreon for a commercial license, early downloads, polls towards future models, and more!

*Note: Palais de Chaillot is missing in the photos but is included in the final model

Comment & Rating (73)

@user_812067437

Boosted

Belle réalisation.

@dtngx

Great print, even on an A1mini. I just uploaded my second print profile, with brim and the settings i learned from after the first print wasn't that good. The eiffeltowerand arc the triomphe might neet to be printed separately, so that they have enough time to cool down. Definetly use brim to improve build plate adhesion for the corners.

@beefs4000

Print Profile

Printable Frame w/ Water (Optional)

Such a great print. Don't mind the Eiffel Tower, that was a toddler issue, not a print one - lol

@ThaMadGreek

printed great with .2 mm nozzle!

@Glerup

Print Profile

Designer Profile (0.16mm layer, Grid infill)

i switched to 0.2 nozzle

@escollins01

Print Profile

Designer Profile (0.16mm layer, Grid infill)

printed very well

@HouseFrye

Print Profile

Designer Profile (0.16mm layer, Grid infill)

@OmerB.

Turkey-İstanbul Pls Bro 🙏🏽

@dtngx

Print Profile

Designer Profile (0.16mm layer, Grid infill)

Very good print, even on A1 mini. Although the tip of the Eiffeltower needs a slower print speed with a 0.2mm nozzle. Otherwise it does not have enough time to cool off. I cut the Eiffeltower off and separatly printed that part afterwards. Works well like this.