M9 Bayonet - Counterstrike
Copyright Claim
M9 Bayonet - Counterstrike
Boost
85
153
6
Print Profile(2)
0.16mm layer, 2 walls, 15% infill
Designer
62.1 h
2 plates
Optimized version 0.1mm layer, 3 walls, 15% infill
6.7 h
2 plates
Boost
85
153
6
0
313
85
Released
Description
M9 Bayonet 1:1 Scale Model (Counterstrike)
Available for both single color and multicolor printing
Multicolor prints have minimal color changes
The single color blade necessitates very slow printing speed as well as the use of a brim. If possible to do a single manual color change, I'd advise going that route.
Comment & Rating (6)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
fell apart
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
did well some filament bleed on blade otherwise great
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
had to do a little bit of sanding and had to hammer in the square part but overall good
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld