My first model I ever uploaded, yay!

See below about details on selling the prints.

These christmas trees are a perfect addition to your Christmas decorations. They are sleek, beautiful, and don't take long to print. For the lights I used: https://www.amazon.com/gp/product/B0BRXX3JDR They are bright and come with a remote. However, any tea light/ puck light works as long as they're less than 2.5" wide.

IMPORTANT! - I strongly recommend you NOT to resize any of these trees. They are hollow and the walls are exactly 1.2mm thick, which is perfect for a .2, .4, and .6 millimeter nozzle because they are a multiple of 1.2mm. If you resize you'll potentially double the print time. Also, these trees will all fit inside each other for easy storage.

I used Sunlu PLA+ for printing mine. They are perfect for light diffusers because it is a bit more transparent than other white pla. I've also printed them Sunlu Petg with great success.

In my print profile I included a raft, since the base of the model is a mere 1.2mm wall it could easily “unstick” from the build plate. Feel free to experiment with this…

Good luck and Merry Christmas!!!

P.S. You can sell these prints to friends and family, just don't start mass producing these. ALSO, no selling online and no more than 100 sales per year. Thank You!