Fidget - ONE WAY SPINNER - Free wheel - print in place
Copyright Claim
Fidget - ONE WAY SPINNER - Free wheel - print in place
Boost
60
125
38
Print Profile(1)
0.2mm layer, 2 walls, 10% infill
Designer
1.2 h
1 plate
Boost
60
125
38
0
232
163
Released
Description
Model - Free wheel:
Print in place, easy and quick to print. A cool free wheel fidget to enjoy. Works only in one direction! Try it out!
This model is intended for single color printing, but feel free to modify and create a multi-color print. And please share pictures of your prints!
Recommendation:
The free wheel bearing must run in first before it runs smoothly. Or you can put same “super lube” (see on the pictures) in the free wheel.
BUT be careful, use very little grease! Otherwise it will lose its function.
Enjoy and have fun!
Happy printing!
Comment & Rating (38)
All
Print Profile
0.2mm layer, 2 walls, 10% infill
works well, Thanks a lot!
The designer has replied
1
Reply
Nice color! Thank you for sharing your result.
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
i runout of filament in the middle 🤪
The designer has replied
1
Reply
Wow. Your free wheel is really cool in two colors! Thanks for sharing your results.
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Printed nicely, works well.
The designer has replied
1
Reply
Thanks for sharing your results!
0
Reply
This was an easy print and the model is a lot fun to play with. Maybe I am addicted...
The designer has replied
1
Reply
Thanks for sharing your results! it looks cool.
(Edited)0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Prints well
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Easy and pleasing fidget spinner, thank you
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
nice sprag gear!
The designer has replied
1
Reply
Thank you! :)
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
love this item for teaching how a helicopter autorotates
1
Reply
could i ask that you beefed up the edges of the bearings? I had them break off using a silk multi PLA when removing from the bed. i used superglue to fix them. i am currently printing a few more in the PETG-CF from Bambu for an aircraft maintenance classroom. I am friends with the guy that makes all the hands on labs and we both thought it would be awesome to use as a hands on example of what allows the helicopters i fly to perform an auto rotation. overall...super cool print!
The designer has replied
0
Reply
Hello Munchers2010. I'm not sure I understood your point correctly. You are asking about a design change to create a stiffer bearing. This requires major changes. This device was only designed as a mechanical toy. Maybe it's possible for you to print this part with more walls?
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
my kid is turning and turning and tu.......
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld