GratKit Cardboard Spool Adapter for AMS
Remixed by
Copyright Claim
GratKit Cardboard Spool Adapter for AMS
Remixed by
Boost
17
23
33
Print Profile(1)
0.28mm layer, 2 walls, 10% infill
Designer
22 min
1 plate
Boost
17
23
33
0
137
226
Released
Description
Remixed for GratKit cardboard spools for the Bambu Lab X1 AMS system
Comment & Rating (33)
All
awesome design, and even though it is meant for GratKit filament, I found that Inland filament from Microcenter also fits!
0
Reply
klappt recht gut nur wenn man das AMS komplett schliesst passt es nicht und die rolle verklemmpt sich leicht lässt man das ams leicht offen geht es einwandfrei
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Fits snug, found that its a bit too slippery still but thats probably the filament I used
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
terrific! really works well.
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
helpful!
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Simple, fast and uses very little filament. Used PETG for a bit more durability.
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Decent spool adapter, but as noted, my spool was slightly larger, causing the lid of the AMS to rub against it (no fault of this design). I was able to crack the lid a little to make it work.
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Great print no issues
0
Reply
The Gratkit cardboard spools that I have seen have a coating on the edge so they don't fray or skid on the AMS rollers.
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
1
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld