This elegant Bottle Dryer is used to dry your bottle after washing it to prevent mold from forming inside the bottle.
- It works simply by putting the bottle neck down through the holding stick. You can use a lot of different bottles, including standart size PET bottles. You can also dry standart glasses. After your bottle/glass dryes, you just pour out the water out of the dryer and that is it.
- Compability: Maximal diameter of glass/bottle that you can fit to the dryer is 85 mm or 3.35 inches (measured at the top of a glass/bottle, the side you put into the dyrer)
- Printing: You can print this in PLA or PETG, use my tested profile. It takes around 2 hours and prints support free.
Sharing is caring, and also please post your make!
Thank you and happy printing! :-)