RoRo Line a Roll on Roll off ship by vandragon_de

vandragon_de

Toys & Games>Other Toys & Games

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

3.4 h

1 plate

4.7(33)

10cm,,0.2mm layer, 2 walls, 15% infill

47 min

1 plate

4.7(7)

0.08mm layer, 2 walls, 10% infill

4.6 h

1 plate

5.0(1)

Boost

211

326

612

320

Released

Description

After my two container ships, I still needed a ship with which the trucks could be loaded directly. What could be more obvious than a roll on roll off ship. Here is my interpretation of this type of ship. Unfortunately with a non-functional tailgate, that would otherwise not be able to float

So let's get to the fun of the game.

Accessories

A great addition

Multicolor:

blue leaves layer - 0 - 7.60mm (Layer 0-38)

turquoise from - 7.80-28.40mm (Layer 39-143)

white from - 28.80-90.40mm (Layer 144-452)

Comment & Rating (43)

@mohsindada1

Print Profile

0.2mm layer, 2 walls, 15% infill

came out grt

@cobussemail

Print Profile

0.2mm layer, 2 walls, 15% infill

@gabriel.kr

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3320095610

Nice Boat, but it does not float so well, it tends to capsize easily, I found the COS boat is a better bath boat for my toddler.

(Edited)

The designer has replied

@vandragon_de

For optimal floating behaviour, it often helps to print the bottom to a defined height with a higher infill, which simply leads to the bottom becoming heavier. Unfortunately, the RoRo ship has much less room for manoeuvre due to the open bottom.