This is a Gizmo Christmas Tree decoration. It's the lovely Gizmo from Gremlins with a Christmas hat.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer using Cura "Pause at Height":
0 to layer 5 (0 to 1mm) = Brown
6 to 9 (1.2 to 1.8mm) = Light Brown
10 to 13 (2 to 2.6mm) = White
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = Red

If you use an Slicer that starts by layer 0 (Prusa Slicer), you need to lower that numbers by one to achieve the effect.

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at @Frikarte3D