Retractable Karambit Knife
Remixed by
Copyright Claim
Retractable Karambit Knife
Remixed by
Boost
1070
1744
341
Print Profile(4)
Single Color - 0.2mm layer, 2 walls, 15% infill
Designer
51 min
1 plate
Print By Object Stronger - 0.2mm layer, 3 walls, 30% infill
Designer
1.1 h
1 plate
Dual Color - 0.2mm layer, 2 walls, 15% infill
Designer
58 min
2 plates
![[2Color, 1Swap]: 0.2mm layer, 3 walls, 99% infill](https://makerworld.bblmw.com/makerworld/model/US28e34967d2533a/design/2023-12-29_4451f92019a8f.jpg?image_process=resize,w_100/format,webp)
[2Color, 1Swap]: 0.2mm layer, 3 walls, 99% infill
1.3 h
1 plate
Boost
1070
1744
341
17
1.8 k
2.4 k
Released
Description
Cool retractable karambit knife remix of a remix originally of cat claw box cutter. I'll have a profile that all one color and a 2nd profile with 2 plates, body separate from links so you can make them different colors if you wish.
I only put supports for the hex nuts on the blade holder to make sure its clean. Push em out super easy with the hex key wrench through the hole from the other side.
Assembly Parts
For Body:
4x - M3x16mm screws
4x - M3 Nuts
For Blade:
2x - M3x5 Screws
2x - M3 Nuts
Magnets [Optional]:
3x - 6mm x 3mm
Comment & Rating (341)
All
Print Profile
Dual Color - 0.2mm layer, 2 walls, 15% infill
Habe das Modell Hochskaliert auf das über 300%.
Hatbsehr gut geklappt.
Ließ sich super drucken und zusammen bauen. Die Verschraubung der Übergroßen Klinge hat nicht ganz gepasst aber das wird noch angepasst.
Sehr zu empfehlen das Modell. Muss es noch mal in original Größe drucken😅...
10
Reply
holy crap!!!
(Edited)2
Reply
I made some adjustments, including blade angle, screw model, and better grip sensation
5
Reply
can you upload your modified profile, it looks very good
1
Reply
Yes, please upload your profile! 🙏🏼
1
Reply
Print Profile
Single Color - 0.2mm layer, 2 walls, 15% infill
Very cool design and practical print. I used PLA+ with this. Followed designer recommended profile settings.
The designer has replied
3
Reply
Looks great
0
Reply
WoW, how do you make it look like carbon fiber?
0
Reply
Replying to @poconut
There are patterned bed plates you can use with the printers. Mostly for PLA prints.
0
Reply
turned out fantastic. would recommend.
The designer has replied
2
Reply
Thanks for the review. Looks great!
0
Reply
love it!!!
The designer has replied
1
Reply
appreciate it!
0
Reply
Boosted
Print Profile
Print By Object Stronger - 0.2mm layer, 3 walls, 30% infill
this is a great proyect, i printed a few of them to gift to my coworkers and they really like them!
The designer has replied
1
Reply
Looks great! thanks!
0
Reply
Print Profile
Single Color - 0.2mm layer, 2 walls, 15% infill
good job
(Edited)
The designer has replied
1
Reply
thank you!
0
Reply
Print Profile
Print By Object Stronger - 0.2mm layer, 3 walls, 30% infill
I really like these, very well-made
1
Reply
Those look great. Can you share the filament type?
0
Reply
my favourite print, giving them to friends who all think its really good.
The designer has replied
1
Reply
Awesome!
0
Reply
Print Profile
Single Color - 0.2mm layer, 2 walls, 15% infill
easy to print and looks really good.
The designer has replied
1
Reply
Thanks for the review!
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld